Icom IC-E80D - Clearing a DTMF Memory

145
13
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Transmitting a DTMF code directly
DTMF code can be transmitted via keypad directly while
transmitting.
q Set the desired frequency. (p. 23)
w Enter “DTMF-T” in DUP.T set mode.
MENU ¶ DUP.T ¶ DTMF-T
(p. 121)
(Push [MENU ]), (Push [](2)/[](8), then push [ ](5).)
e Push [](2) or [](8) to select DTMF transmitting key
(KEY).
r While pushing [PTT], push the desired keys to transmit
the DTMF code.
• [0]–[9] input “0”–“9,” [A](V/MHz) inputs “A,” [B](M/
CALL) inputs “B,” [C](DR) inputs “C,” [D]() inputs “D,”
[1](BAND) inputs “1” and [#](.) inputs “#.”
DTMF code keys
N Clearing a DTMF memory
An unwanted DTMF memory can be cleared (erased).
q Push and hold [DTMF.M](0) for 1 sec. to enter DTMF
memory mode.
w Push [](2) or [](8) to select the desired DTMF mem-
ory channel to be cleared.
e Push and hold [CLR](1) for 1 sec. to clear the selected
DTMF memory channel.
After clearing the DTMF memory.
When entering DTMF programming mode.
r Push [V/MHz] to exit DTMF memory.