IDEC SmartRelay Manual 108
4 IDEC SmartRelay functions
Organization
IDEC SmartRelay provides you with various elements in pro-
gramming mode. In order to maintain the overview, we have
organized the elements in ‘Lists’. These lists are:
• ↓Co: Connector list (Connector)
(see Chapter 4.1)
• ↓GF: List of the basic functions AND, OR, ...
(refer to Chapter 4.2)
• ↓SF: List of the special functions
(refer to Chapter 4.4)
• ↓BN: List of reusable blocks configured in the circuit pro-
gram
List contents
All lists show the elements available in IDEC SmartRelay.
Usually, this includes all connectors, basic functions and
special functions the IDEC SmartRelay knows. This includes
all the blocks you have created in IDEC SmartRelay by the
time you call the ↓BN list.
If not all is shown
IDEC SmartRelay does not show all elements if:
• No further blocks may be added.
This is either an indication of insufficient memory space
or that the maximum number of blocks has been reached.
• A specific block’s memory space requirement would ex-
ceed the space available in IDEC SmartRelay.
See Chapter 3.7.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To Next Page
Loading...
Need help?
General
