IDEC SmartRelay FL1D Series - Connecting IDEC Smartrelay Inputs

IDEC SmartRelay installation and wiring
29
IDEC SmartRelay Manual
2.3.2 Connecting IDEC SmartRelay inputs
Requirements
At the inputs you connect sensor elements such as: momen-
tary switches, switches, light barriers, daylight control
switches etc.
Sensor characteristics for IDEC SmartRelay
FL1D-H12RCE
FL1D-B12RCE
FL1B-M08B2R2
(1),(2)
(1) : 1.0 mA (Version 1 to 5 specifications)
(2) : 8 V DC (Version 1 to 5 specifications)
FL1D-H12SND
FL1B-M08B1S2
(3),(4),(5)
(3) : 1.0 mA (Version 1 to 4 specifications)
(4) : 8 V DC (Version 1 to 4 specifications)
(5) : 1.5 mA (Version 1 to 4 specifications)
For identifying the version, see page 4.
I1 ... I6 I7, I8 I1 ... I6 I7, I8
Signal status 0 < 5 VDC < 5 VDC < 5 VDC < 5 VDC
Input current < 0.85 mA
(1)
< 0.05 mA < 0.85 mA
(3)
< 0.05 mA
Signal status 1 > 8.5 V DC
(2)
> 8.5 V DC > 12 V DC
(4)
> 12 V DC
Input current > 1.5 mA > 0.1 mA > 2 mA
(5)
> 0.15 mA
FL1D-
H12RCA/
FL1D-
B12RCA (AC)
FL1B-M08
D2R2 (AC)
FL1D-
H12RCA/
FL1D-
B12RCA (DC)
FL1B-M08
D2R2 (DC)
FL1D-
H12RCC/
FL1D-
B12RCC (AC)
FL1B-M08
C2R2 (AC)
FL1D-
H12RCC/
FL1D-
B12RCC (DC)
FL1B-M08
C2R2 (DC)
Signal status 0 < 5 V AC < 5 V DC < 40 V AC < 30 V DC
Input current < 1.0 mA < 1.0 mA < 0.03 mA < 0.03 mA
Signal status 1 > 12 V AC > 12 V DC > 79 V AC > 79 V DC
Input current > 2.5 mA > 2.5 mA > 0.08 mA > 0.08 mA
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com