IDEC SmartRelay FL1D Series - PI Controller

IDEC SmartRelay functions
IDEC SmartRelay Manual 222
4.4.28 PI controller
Short description
Proportional-action and integral-action controllers. You can
use both types of controller individually or combined.
Symbol in
IDEC SmartRelay
Wiring Description
Input A/M Set the mode of the
controller:
1: automatic mode
0: manual mode
Input R Use the input R to reset the
output AQ. As long as this
input is set, the input A/M is
disabled.
Output AQ is set to 0.
Input PV Analog value: process value,
influences the output
A/M
R
PV
Par
AQ
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com