IDEC SmartRelay FL1D Series User Manual

IDEC SmartRelay memory cartridge (card)
IDEC SmartRelay Manual 246
6.2 Inserting and removing the memory car-
tridge (card)
When you remove a memory cartridge (card) with circuit pro-
gram and copy protection attribute, note the following: The
circuit program stored on the memory cartridge (card) can
only be executed if the card remains inserted during system
runtime.
After you have removed the memory cartridge (card), IDEC
SmartRelay outputs the message 'No Program'. A removal
of the memory cartridge (card) during RUN will lead to imper
-
missible operating states.
Always heed the following warning:
!
Warning
Do not touch the open slot of the memory cartridge (card) neither
with your fingers, nor with a metallic or conductive object.
The memory cartridge (card) socket may be under voltage if the
polarity is accidentally reversed at L1 and N.
The memory cartridge (card) may only be removed by qualified
personnel.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

IDEC SmartRelay FL1D Series Specifications

General

Brand	IDEC
Model	SmartRelay FL1D Series
Category	Control Unit
Language	English