Getting started with IDEC SmartRelay
IDEC SmartRelay Manual 2
Each version is integrated into 4 subunits (SU), is equipped
with an expansion interface and provides 36 pre-configured
standard and special function blocks for the creation of your
circuit program.
Which expansion modules are available?
• IDEC SmartRelay digital modules are available for oper-
ation with 12 V DC, 24 V AC/DC and 100...240 V AC/DC,
and are equipped with four inputs and four outputs.
• IDEC SmartRelay analog modules are available for oper-
ation with 24 V DC and with 12 V DC, and are equipped
with two analog inputs or two analog outputs.
The digital/analog modules are integrated in two subunits.
Each one is equipped with two expansion interfaces for con
-
necting additional modules.
Which communication modules are available?
• IDEC SmartRelay communication module FL1B-CAS2,
which is described in more detail in a separate documen
-
tation.
The communication module has four virtual inputs and
outputs, and acts as an interface between an AS-Inter
-
face system and an IDEC SmartRelay system. The mod-
ule enables four data bits to be transferred from the IDEC
SmartRelay Base to the AS-Interface system and vice
versa.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To Next Page
Loading...