Getting started with IDEC SmartRelay
IDEC SmartRelay Manual 12
IDEC SmartRelay is issued with the CE Certificate of Confor-
mity. It is compliant with VDE 0631 and IEC 61131-2 and in-
terference-proof to EN 55011, Limit Class B.
Marine certification has been requested.
• ABS (American Bureau of Shipping)
• BV (Bureau Veritas)
• DNV (Det Norske Veritas)
• GL (Germanischer Lloyd)
• LRS (Lloyds Register of Shipping)
• Class NK (Nippon Kaiji Kyokai)
ID for Australia
Recycling and Disposal
IDEC SmartRelay units can be fully recycled, due to their
low-pollutant equipment. Contact a certified electronic waste
disposal center for environmentally acceptable recycling and
disposal of your old devices.
!
Warning
Risk of personal injury and material damage.
In potentially explosive atmospheres, there is a risk of personal in-
jury or damage to material if you disconnect connectors when the
system is in RUN.
In potentially explosive atmospheres, always switch off the power
supply to IDEC SmartRelay and its components before you discon-
nect any connectors.
Our products carrying the label shown at the side are com-
pliant with AS/NZS 2064:1997 (Class A) standard.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To Next Page
Loading...