IDEC SmartRelay memory cartridge (card)
IDEC SmartRelay Manual 242
Compatibility
... to current versions (FL1C and FL1D devices):
Data written to the memory cartridge (card) in an FL1C ver-
sion can be read in all FL1C and FL1D versions.
Data written to the memory cartridge (card) in an FL1D ver-
sion can be read in all FL1D versions.
... to earlier versions (FL1A or FL1B devices):
A memory cartridge (card) that contains data written in
earlier versions (FL1A or FL1B devices) can not be used in
IDEC SmartRelay devices of the FL1C or FL1D generation.
When the IDEC SmartRelay system detects such an ‘old’
memory cartridge (card), the message “Unknown Card /
Press ESC” is output to the display.
Vice versa, an FL1C or FL1D memory cartridge (card) can
not be used in IDEC SmartRelay devices of the FL1A or
FL1B family.
Upward compatibility of circuit programs
Circuit programs written for the previous versions FL1A or
FL1B can only be applied in FL1C or FL1D units by means
of WindLGC.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To Next Page
Loading...