IDEC SmartRelay installation and wiring
IDEC SmartRelay Manual 16
Risks
In all cases where the occurrence of failures can result in
material damage or injury to persons, special measures
must be taken to enhance the safety of the installation - and
therefore also of the situation. System-specific and special
regulations exist for such applications. They must be ob
-
served on installing the control system (e.g. VDE 0116 for
burner control systems).
For electronic control equipment with a safety function, the
measures that have to be taken to prevent or rectify faults
are based on the risks involved in the installation. As of a cer
-
tain degree of hazard the basic measures mentioned above
are no longer sufficient. Additional measures must be imple
-
mented and approved for the controller.
Important information
The instructions in the operating manual must be followed
exactly. Incorrect handling can render measures intended to
prevent dangerous faults ineffective, or generate additional
sources of danger.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To Next Page
Loading...
Need help?
General
