idp SMART-81 - Figure 22 Preparing the Card 1; Figure 23 Preparing the Card 2; Figure 24 Loading the Card 1; Figure 25 Loading the Card 2

37
(3) To separate cards from each
other, push a stack of cards
back and forth to an angle
about 45 degrees vertically.
Figure 22 Preparing the card 1
Figure 23 Preparing the card 2
(4)
Stand the stack of cards
vertically after separating.
Figure 24 Loading the card 1
(5) Load the cards on the
hopper properly and install
the hopper cover.
Figure 25
Loading the card
2