58
(2) Card Printer Basic Setup
Figure 61 Cardprinterconfig Basic setup
① To show connected printers.
Device: You can select a printer using pull-down menu. “IDP SMART-51 Card
Printer” is a name of printer. “SMART1” is printer ID, “USB005” is
connected port. If you connect the Network printer, please check the
“Allow Network Printer” and select in the pull-down menu.
② To set administrator password and user password.
Change Root PW: To set administrator (root) password. This password is used
to verify user authority for CardPrinterConfig and User Authentication. Also
it is required for User password management.
(Please set password for security use.)
Change User PW: To set user password for User Authentication.
To Next Page
Loading...
