PCIE-Q57A PICMG 1.3 CPU Card
Page 94
PME Resume on [Disabled]
Use the PME Resume BIOS option to enable activity on the PCI PME (power
management event) controller to rouse the system from a suspend or standby state.
Disabled DEFAULT
Wake event not generated by PCI PME controller
activity
Enabled
Wake event generated by PCI PME controller activity
RI Resume on Ring [Disabled]
Use the RI Resume BIOS option to enable activity on the RI (ring in) modem line to rouse
the system from a suspend or standby state. That is, the system will be roused by an
incoming call on a modem.
Disabled DEFAULT
Wake event not generated by an incoming call
Enabled
Wake event generated by an incoming call
RTC Resume [Disabled]
Use the RTC Resume option to specify the time the system should be roused from a
suspended state.
Disabled DEFAULT
The real time clock (RTC) cannot generate a wake
event
Enabled
If selected, the following appears with values that
can be selected:
RTC Alarm Date (Days)
RTC Alarm Time
After setting the alarm, the computer turns itself on
from a suspend state when the alarm goes off.
PCIE Port n [Enabled]
Use the PCIE Port n option to determine enable or disable the nth PCI Express port.
To Next Page
Loading...
Need help?
General
