PCIE-Q57A PICMG 1.3 CPU Card
Page 52
4.9 Software Installation
All the drivers for the PCIE-Q57A are on the CD that came with the system. To install the
drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"
Step 2: The driver main menu appears (Figure 4-16).
Figure 4-16: Introduction Screen
Step 3: Click PCIE-Q57A.
Step 4: A new screen with a list of available drivers appears (
Figure 4-17).
To Next Page
Loading...
Need help?
General
