IEI Technology PCIE-Q57A User Manual

PCIE-Q57A PICMG 1.3 CPU Card
Page 114
Step 3: The recovery tool setup menu is shown as below.
Figure C-3: Recovery Tool Setup Menu
Step 4: Press <5> then <Enter>.
Figure C-4: Command Mode
Step 5: The command prompt window appears. Type the following commands (marked
in red) to create two partitions. One is for the OS installation; the other is for
saving recovery files and images which will be an invisible partition.
(Press <Enter> after entering each line below)
system32>diskpart
DISKPART>list vol
DISKPART>sel disk 0
DISKPART>create part pri size= ___
DISKPART>assign letter=N
DISKPART>create part pri size= ___
DISKPART>assign letter=F
DISKPART>exit
system32>format N: /fs:ntfs /q /y

IEI Technology PCIE-Q57A Specifications

General

Brand	IEI Technology
Model	PCIE-Q57A
Category	Motherboard
Language	English