5 - 28
Transpector MPH Operating Manual
5.6.2 Generating Shortcuts for Quick Access
Since Transpector Web UI is browser based, shortcuts can be generated that will
open a browser and direct it to the attached webpage address. In this manner,
remembering the IP address for one (or multiple) Transpector MPH sensors is not
necessary. Creating shortcuts also allows for differentiating between different
Transpector MPH when more than one is present on the network.
1 Open Transpector Web UI.
2 Highlight the webpage address in the browser, right-click, then click Copy.
See Figure 5-18.
NOTE: There can be more than one shortcut per sensor. For example, a
shorted can be created to display the MONITOR window, and a
different shortcut to display the LEAK CHECK window.
Figure 5-18 Copy web address
3 Right-click on the Desktop and select Create New >> Shortcut.
See Figure 5-19.
Figure 5-19 Create new shortcut
To Next Page
Loading...
Need help?
General
