Inficon Transpector MPH User Manual

6 - 1
Transpector MPH Operating Manual
Chapter 6
Maintenance
6.1 Introduction
The Transpector MPH sensor is subject to aging in normal use and some of its
components will eventually require repair or replacement.
The Transpector MPH electronics module does not normally require repair or
maintenance.
WARNING - Risk Of Electric Shock
Opening the Transpector MPH Electronic Module should
only be done by qualified service personnel. There are no
user-serviceable parts inside the Electronic Module.
INFICON provides complete maintenance service for both sensors and Electronic
Modules. Refer to section 1.3, How To Contact Customer Support, on page 1-3.
6.2 Safety Considerations
If Transpector MPH is used in a manner not specified by INFICON, protection
provided by the equipment may be impaired.
6.2.1 Toxic Material
The Transpector MPH sensor does not contain any toxic material. However, if the
Transpector MPH sensor is used in an application wherein toxic material is used or
generated, residue of the toxic material will likely be present on the surface of the
Transpector MPH sensor. Appropriate safety precautions must be taken when
handling contaminated sensors in order to assure safety of maintenance
personnel.
To return the sensor to INFICON for repair, refer to section 1.3.1, Returning Your
Transpector MPH to INFICON, on page 1-3.
The Transpector MPH electronics module is RoHS compliant.
6.2.2 Radiation
Transpector MPH Gas Analysis systems are not known to produce
harmful radiation.

Inficon Transpector MPH Specifications

General

Brand	Inficon
Model	Transpector MPH
Category	Measuring Instruments
Language	English