Inficon Transpector MPH - Chapter 11: Specifications; 11.2 Sensor Length (Vacuum Side); 11.3 Mass Range; 11.7 Sensitivity

1 - 8
Transpector MPH Operating Manual
1.11 Overvoltage Category
Overvoltage Category II (per EN61010-1)
1.12 Required Vacuum
<5 x 10
-4
Torr (6.7 x 10
-4
mbar) [6.7x 10
-2
Pascals]
1.13 Environmental Requirements
The following paragraphs explain the use, altitude range, humidity, pollution
degree, and operating temperature for Transpector MPH.
1.13.1 Use
Transpector MPH is designed for indoor use only.
1.13.2 Altitude Range
Transpector MPH can be used up to a maximum altitude range of
2000 m (6561 ft.).
1.13.3 Pollution Degree
Pollution Degree 2 (per EN61010-1)
1.13.4 Operating Temperature
Transpector MPH is designed to operate within a temperature range of
5°C to 50°C (41°F to 122°F).
1.13.5 Humidity
Transpector MPH is designed to operate in an environment with up to
98% relative humidity.
1.14 Computer System Requirements
Refer to the FabGuard Explorer Operating Manual (PN 074-528) for computer
system requirements.
1.15 Software Installation
Refer to the FabGuard Explorer Operating Manual (PN 074-528) for information on
installing the software and setting up the protocols necessary to ensure proper
software operation.