INFICON Installation | 5
UL3000-Fab-ULTRA-Operating-instructions-iinb73en1-09-(2109) 45 / 152
Install the "Bracket for corrugated tube"
Scope of delivery (amount): Holder complete (1x), screws M6 x 12 (3x), lock washer
S6 (3x), self-tapping screws (2x)
Required tools (supplied): Wrench T25 and T30
For fixing a corrugated hose between the inlet flange of the device and the test
chamber or test object respectively.
1 Holder complete 3 Self-tapping screws
2 Screw M6 x 12, lock washer S6
To Next Page
Loading...