SKYZER TECHNOLOGIES PAGE 40 OF 97
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE Version 1.3
3.7.1.2 TCP-IP (Broadband) Configuration
1.0
Press FUNC
2.0
FUNCTION?
FUNCTION?FUNCTION?
FUNCTION?
Enter 7418, press ENTER
3.0
MULTI MERCHANT
MULTI MERCHANTMULTI MERCHANT
MULTI MERCHANT
SETUP
SETUPSETUP
SETUP
Terminal is now in configuration mode. Go to following Steps to proceed or Press
CANCEL to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
4.0
MULTI MERCHANT
MULTI MERCHANTMULTI MERCHANT
MULTI MERCHANT
SETUP
SETUPSETUP
SETUP
Select option 5 for RKI configuration by pressing the corresponding number key.
5.0
RKI
RKIRKI
RKI
CONFIG?
CONFIG?CONFIG?
CONFIG?
ENTER OR CLEAR
ENTER OR CLEARENTER OR CLEAR
ENTER OR CLEAR
Press ENTER to proceed with the RKI configuration or CLEAR to cancel and exit to
idle screen
6.0
NII?
NII?NII?
NII?
018
018018
018
This parameter specifies the Network International Identifier that the terminal uses
to route messages to Paymark.
Press ENTER.
7.0
RKI
RKIRKI
RKI
HOST IP ADDRESS
HOST IP ADDRESSHOST IP ADDRESS
HOST IP ADDRESS
117.120.34.103
117.120.34.103117.120.34.103
117.120.34.103
This parameter specifies the RKI HOST IP ADDRESS of the Paymark, where it will
be connecting to download the keys. By default, the PKMS Host IP Address is set as
117.120.34.103.
8.0
RKI
RKIRKI
RKI
HOST PORT
HOST PORTHOST PORT
HOST PORT
7540
75407540
7540
This parameter specifies the RKI HOST PORT of the Paymark, where it will be
connecting to download the keys. By default, the PKMS Host Port is set as 7540.
8.0
MULTI MERC
MULTI MERCMULTI MERC
MULTI MERCHANT
HANTHANT
HANT
SETUP
SETUPSETUP
SETUP
Terminal is now in configuration mode. Press CANCEL to exit, otherwise the
terminal will automatically exit after 30 seconds of inactivity
To Next Page
Loading...
