SKYZER TECHNOLOGIES PAGE 86 OF 97
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE Version 1.3
5.2 DIAGNOSTICS
This function allows the merchant to perform diagnostic functions to aid in the
maintenance of the terminal.
1.0
Press FUNC.
2.0
FUNCTION?
FUNCTION?FUNCTION?
FUNCTION?
Enter 9904, press ENTER.
3.0
SELF TEST?
SELF TEST?SELF TEST?
SELF TEST?
ENTER OR CLEAR
ENTER OR CLEARENTER OR CLEAR
ENTER OR CLEAR
Press ENTER to continue with the self test CLEAR to cancel and return to idle
prompt.
4.0
CARD READ TES
CARD READ TESCARD READ TES
CARD READ TEST?
T?T?
T?
ENTER OR CLEAR
ENTER OR CLEARENTER OR CLEAR
ENTER OR CLEAR
Press ENTER to start CARD READ TEST, CLEAR to bypass CARD READ TEST
or CANCEL to cancel and return to idle prompt.
4.1
SWIPE CARD
SWIPE CARDSWIPE CARD
SWIPE CARD
Swipe a magnetic stripe card through the magnetic stripe card reader. Press
ENTER or CLEAR to go to chip read test.
4.2
GOOD CARD READ
GOOD CARD READGOOD CARD READ
GOOD CARD READ
Displays if the terminal is successful to read the magnetic stripe data.
4.3
BAD CARD READ
BAD CARD READBAD CARD READ
BAD CARD READ
Displays if the terminal is unable to read the magnetic stripe data.
5.0
CHIP READ TEST?
CHIP READ TEST?CHIP READ TEST?
CHIP READ TEST?
ENTER OR CLEAR
ENTER OR CLEARENTER OR CLEAR
ENTER OR CLEAR
Press ENTER to start CHIP READ TEST, CLEAR to bypass CHIP READ TEST or
CANCEL to cancel and return to idle prompt.
5.1
INSERT CARD
INSERT CARDINSERT CARD
INSERT CARD
Insert the chip card into the chip card reader slot in the terminal. Press ENTER or
CLEAR to go to keyboard test.
5.2
CARD OK
CARD OKCARD OK
CARD OK
Displays if the terminal is successful to read the chip card contact.
5.3
CARD IS MUTE
CARD IS MUTECARD IS MUTE
CARD IS MUTE
Displays if the terminal is unable to read the chip card contact.
5.4
REMOVE CARD
REMOVE CARDREMOVE CARD
REMOVE CARD
Remove card from the chip card reader slot.
To Next Page
Loading...
