Ingenico 5100 - Ingenico 5100 Keyboard Layout

SKYZER TECHNOLOGIES PAGE 9 OF 97
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE Version 1.3
2.1.2 The i5100 Keyboard
The keyboard is comprised of the 0 to 9 keys. They are used for data entry
(amount, PIN and manual card number entry).
Figure 2 - i5100 Keyboard
The keyboard layout consists of:
• Keyboard (0 through 9)/
• Red/CANCEL/NO key/
• Yellow/ CLEAR/NO key/
• Green/ ENTER/YES input key/
• FUNCTION key/
• FEED key/
• Soft function/Navigation keys located directly under the display keys
(/CHQ, SAV/

 & CR/  ) to allow the user to select alternate options
on the display.
The FEED key
advances the
paper a few
Keyboard
The FUNCTION key provides
access to the merchant
functions.
The navigation keys
navigate
in the terminal menus
The CHQ, SAV and CR key allows
account selection and soft key
functions.
The Yellow/CLEAR key
cancels the last
character
The Red/CANCEL key cancels
the procedure in progress, goes
to idle state
The Green/ENTER key validates
the input selections and
information.