Ingenico 5100 - Remote Key Injection (PKMS) Initialisation

SKYZER TECHNOLOGIES PAGE 41 OF 97
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE Version 1.3
3.7.2 Remote Key Injection (PKMS) Initialisation
This function allows the Paymark security keys to be injected into the terminal
through the following steps below.
Step
Terminal Display
Description
1.0
Press FUNC.
2.0
FUNCTION?
FUNCTION?FUNCTION?
FUNCTION? Key in 87 and press ENTER
3.0
RKI
RKIRKI
RKI PASSWORD?
PASSWORD?PASSWORD?
PASSWORD? Key in 6987 and press ENTER
4.0
REMOTE INIT
REMOTE INITREMOTE INIT
REMOTE INIT
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
Terminal starts to download remote keys into the terminal from the Paymark host.
5.0
PROCESSING NOW
PROCESSING NOWPROCESSING NOW
PROCESSING NOW Terminal has begun to download the keys into the terminal.
6.0
ACCEPTED
ACCEPTEDACCEPTED
ACCEPTED RKI logon was successful to download the keys to the terminal. After this, restart
the terminal by pressing FUNC 86 followed by ENTER twice.
After a successful RKI (PKMS) key injection into the terminal, restart the terminal
by performing the steps below:
Step
Terminal Display
Description
1.0
Press FUNC.
2.0
FUNCTION?
FUNCTION?FUNCTION?
FUNCTION? Enter 86 and press ENTER.
3.0
RESTART
RESTART RESTART
RESTART
TERMINAL?
TERMINAL?TERMINAL?
TERMINAL?
Press ENTER to restart the terminal or CLEAR to cancel and return to idle screen.
Once the terminal boots up, a merchant logon (Page 47) can been initiated
and successfully completed with an ACCEPTED response, the terminal is ready
to process transaction.