Ingenico 5100 - Page 43

SKYZER TECHNOLOGIES PAGE 43 OF 97
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE Version 1.3
13.0
INTERFACED
INTERFACEDINTERFACED
INTERFACED
OFF
OFFOFF
OFF
Press CHQ to enable the INTERFACED function and proceed with the step 12.1 or
press CANCEL to disable the INTERFACED function and press ENTER.
13.1
LICENSE KEY?
LICENSE KEY?LICENSE KEY?
LICENSE KEY?
XXXXXXX
XXXXXXXXXXXXXX
XXXXXXX
The License Key can only be obtained from Skyzer Technologies. Key in the
License number followed by ENTER.
NOTE: Before entering the License key, please ensure that the date and time on
the terminal is current. There are two ways of updating the date and time on the
terminal:
1. By initiating a merchant logon
2. Manually changing the date and time – Refer to page 89.
13.2
INTERFACED
INTERFACEDINTERFACED
INTERFACED
ON
ONON
ON
Press ENTER to activate the INTERFACED function.
14.0
SWIPE START
SWIPE STARTSWIPE START
SWIPE START
OFF
OFFOFF
OFF
Press CHQ to enable or disable the SWIPE START function followed by ENTER.
NOTE: This swipe start function allows the merchant to deactivate the swipe start
from the idle screen. This feature will apply in the environment of Contactless or
Interface. For example, if the EFTPOS terminal is interfaced to a POS system, the
swipe start function can be enabled to restrict the cardholders swiping their card
before the EFTPOS terminal has received the transaction from POS system.
When the interface link or contactless is enabled on the terminal, the
swipe start function will automatically be deactivated and vice-versa.