EasyManua.ls Logo

Ingenico 5100 - Page 74

Ingenico 5100
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SKYZER TECHNOLOGIES PAGE 74 OF 97
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE Version 1.3
11.0
SIGNATURE OK? Y/N
SIGNATURE OK? Y/NSIGNATURE OK? Y/N
SIGNATURE OK? Y/N
ENTER=YES,CLR
ENTER=YES,CLRENTER=YES,CLR
ENTER=YES,CLR=NO
=NO=NO
=NO
Verify the cardholder’s signature with the signature on the back of the card. If
the signature matches:
Press ENTER to accept and proceed with step 12.0
If not, press CLEAR to decline and proceed with step 13.0
12.0
SIG ACCEPTED
SIG ACCEPTEDSIG ACCEPTED
SIG ACCEPTED
SIG ACCEPTED will be displayed on the terminal screen. The merchant presses
ENTER to accept the cardholder’s signature after verifying signature with the
card.
13.0
SIG DECLINED
SIG DECLINEDSIG DECLINED
SIG DECLINED
SIG DECLINED will be displayed on the terminal screen. The merchant presses
CLEAR to decline the cardholder’s signature after verifying signature with the
card.
For Card Not Present Transaction
14.0
CARD NUMBER:
CARD NUMBER:CARD NUMBER:
CARD NUMBER:
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
Terminal will then prompt for the card number to be manually entered.
Key in the card number and press ENTER.
15.0
EXPIRY <MMYY>:
EXPIRY <MMYY>:EXPIRY <MMYY>:
EXPIRY <MMYY>:
XXXX
XXXXXXXX
XXXX
Enter the expiry date as shown on card. Ensure that numbers are in month/year
format.
Key in expiry date and press ENTER.
16.0
CSC ON CARD Y/N
CSC ON CARD Y/NCSC ON CARD Y/N
CSC ON CARD Y/N
Terminal will prompt whether card has a CSC (Card Security Code = a 3-4 digit
number on back of card.)
Press ENTER to key in the Card Security Code number and proceed with step
6.0.
Press CLEAR to select ‘NO’ and proceed with step 7.0.
17.0
ENTER CSC CODE
ENTER CSC CODEENTER CSC CODE
ENTER CSC CODE
If YES is selected, key in the CSC code as it appears on the back of the card and
press ENTER.
18.0
SELECT REASON
SELECT REASONSELECT REASON
SELECT REASON
1. NOT ON CARD
1. NOT ON CARD1. NOT ON CARD
1. NOT ON CARD
2. CANNOT READ
2. CANNOT READ2. CANNOT READ
2. CANNOT READ
3. CUST ADVISED
3. CUST ADVISED3. CUST ADVISED
3. CUST ADVISED
If NO is selected, choose the appropriate reason by pressing the corresponding
number key.
19.0
PURCHASE AMOUNT?
PURCHASE AMOUNT?PURCHASE AMOUNT?
PURCHASE AMOUNT?
$0.00
$0.00$0.00
$0.00
Terminal will prompt for Purchase Amount
Enter the purchase amount and press ENTER.
20.0
CASH OUT
CASH OUTCASH OUT
CASH OUT
AMOUNT?
AMOUNT?AMOUNT?
AMOUNT?
$0.00
$0.00$0.00
$0.00
Only applicable if the CASH OUT is turned on.
Press ENTER to bypass “CASH OUT”
21.0
SELECT TYPE
SELECT TYPESELECT TYPE
SELECT TYPE
1. MOTO
1. MOTO1. MOTO
1. MOTO
2. UNSECURE ECOM
2. UNSECURE ECOM2. UNSECURE ECOM
2. UNSECURE ECOM
Select the Transaction Type by pressing the corresponding number key:
1. MOTO (Mail order Telephone Order)
2. Unsecure ECOM (Electronic Commerce .e.g. Internet)
If 1 is pressed, then follow through to step 22.0.
If 2 is pressed, then follow through to step 23.0

Table of Contents

Other manuals for Ingenico 5100

Related product manuals