Ingenico i6780 - Setting up the Phone Number to Dial; Setting up the Modem Speed; Changing the Position of the Host Port or Aux Port

Domain Name
Enter the domain name. For example, to enter A,
press 2 twice. To enter C, press 2 four times.
Updating…
6.4.21 Setting Up the Phone Number to Dial
This option is not applicable to the Ingenico 6780, since none of the Ingenico 6780
configurations have a modem.
_QZ ABC DEF
GHI JKL MNO
PRS TUV WXY
CAN
CLR
E
N
T
E
R
1
23
456
78
9
0
*# , .
6.4.22 Setting Up the Modem Speed
This option is not applicable to the Ingenico 6780, since none of the Ingenico 6780
configurations have a modem.
6.4.23 Changing the Position of the Host Port or Aux Port
The ports are labeled Host, Aux, and E-NET, and by default, Port 1 = Host, Port 2 = Aux, Port
3 = Ethernet. However, you may configure Port 1, 2, or 3 as the Host port or Aux port through
this menu option. For example, if your host uses Ethernet, you may set your host port as Port
3.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Using the stylus, tap
Supervisor Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Tap
Sys Parameters.
Ingenico 6780 User’s Guide 61