Chapter 3
System Configuration Menu
3.1 Overview
This chapter explains how to perform the functions in the system configuration menu: change
date and time, set display contrast, and adjust beep tones (length and tone).
3.2 Changing the Date and Time
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
Using the stylus, tap
System Config.
System Config
System Info
Supervisor Menu
System Config
System Date/Time
Display Contrast
Tap
System Date/Time.
Enter Date Key the new date using the format YYYYMMDD,
then press [Enter]. To bypass, press [Enter].
2003/08/22
_QZ ABC DEF
GHI JKL MNO
PRS TUV WXY
CAN
CLR
E
N
T
E
R
1
23
456
78
9
0
*# , .
Enter Time Key the new time using the format, HHMM, then
nter the H (for hour).
17H21
press [Enter]. The system uses a 24-hour clock.
To bypass, press [Enter].
Note: You do not need to e
10 Chapter 3 System Configuration Menu
Section 3.1 Overview
To Next Page
Loading...
