Ingenico i6780 - Testing the USB Port

7.7 Testing the USB Port
This feature tests the USB connection.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Diagnostic Menu
Using the stylus, tap
Diagnostic Menu.
Diagnostic Menu
Display
Tap
USB.
Keypad
Beeper
RS232
Tailgate
USB
USB Diagnostic
Connect USB Port OK
Start PC App then
Push OK Key to send
1. From the HOST, start uloop.exe.
2. From the terminal, press [Enter].
USB Diagnostic
MESSAGE n
Send . . .
The results of the test display. To exit, press
[Cancel].
Ingenico 6780 User’s Guide 71