5.5.2 Injecting Keys
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Using the stylus, tap
Supervisor Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Tap
Security.
Security
Key Injection
Key Check Value
Erase App Keys
Serialnum Inject
Press [Enter] to select Key Injection.
Key Injection
Inject Keys
Injection Port
Press [Enter] to select Inject Keys.
Key Injection
Wait for command…
The terminal will now accept the key injection.
For instructions on how to inject keys, see the
manual for your key injection software (such as
Ingenico’s KeyFac or WinKeyFac).
When finished, press [Cancel] to return to the
previous menu.
Cancel
30 Chapter 5 Supervisor Menu
Section 5.5 Security
To Next Page
Loading...
