Chapter 2
Extended Menu Overview
2.1 Overview
The Extended Menu allows you to configure the terminal, get system information, check the
file system, do key injection, get key check value, set system parameters for downloading, and
test the product hardware. This chapter explains how to navigate the Extended Menu and
includes a chart of menu options. Subsequent chapters explain how to perform functions in the
Extended Menu. The Extended Menu descriptions are current as of SSA VAR05 version 2.36.
2.2 Accessing the Extended Menu
To access the Extended Menu:
Restart the terminal by pressing [1] + [Cancel] + [Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to access the Extended Menu.
2.3 Navigating the Extended Menu
The current menu name displays on the first line, and the menu options appear on subsequent
lines.
To press a screen button, use your finger or the stylus.
To select a menu item, tap it using the stylus, or use the keys to select (see following
table).
Note: Because the menu items are small, touching a menu item with your finger to
select will not work (use the stylus instead). Or, you may use the following keys to
navigate the menu.
Keys:
USA
Canada
Europe
Action
+ + - Scroll down one item
- - + Scroll up one item
X Enter X OK X Enter Initiate selected menu option
< Clear < Corr < Clear No effect in the Extended Menu
O Cancel O Can/Ann O Cancel Return to the previous menu
If you are at the Extended Menu, return to
application’s idle prompt
Note: As you can see in the table, there are three sets of keys, one for each region. This
4 Chapter 2 Extended Menu Overview
Section 2.1 Overview
To Next Page
Loading...
