Chapter 5
Supervisor Menu
5.1 Overview
This chapter explains how to change the supervisor password, check or erase the application
file in the terminal, and perform the following security functions: set key injection port, allow
key injection, check the key value, and allow the serial key to be injected.
5.2 Supervisor Menu Password
This is the default password for entering the Supervisor Menu.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Using the stylus, tap
Supervisor Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Note: If an incorrect password is entered, the
message Password Invalid displays, then a
prompt asks you to reenter the password. After
three incorrect passwords, the application returns
to the Extended Menu.
_QZ ABC DEF
GHI JKL MNO
PRS TUV WXY
CAN
CLR
E
N
T
E
R
1
23
456
78
9
0
*# , .
Ingenico 6780 User’s Guide 25
To Next Page
Loading...
