Local IP Port
Old Value: XXXXX
Enter the local IP port number.
Enter New Value:
6.4.14 Defining the Server IP Address
If your terminal is using Ethernet, and DHCP is set to None, you will need to configure the
download server’s IP address.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Using the stylus, tap
Supervisor Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Tap
Sys Parameters.
Sys Parameters
Download Method
Download Port
Setup Port
Tap
Setup Port.
Setup Port
Port1
Port2
Port3
Tap
Port3, Ethernet.
Port3
Interface Type
Baud Rate
Data Bits
Stop Bits
Parity
DHCP
Local IP
Local IP Port
Server IP
Tap ▼ until you reach Server IP, then tap
Server
IP
.
Ingenico 6780 User’s Guide 53
To Next Page
Loading...
