Ingenico i6780 - Testing the Magnetic Stripe Reader

7.8 Testing the Magnetic Stripe Reader
This feature tests the magnetic stripe reader.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Diagnostic Menu
Using the stylus, tap
Diagnostic Menu.
Diagnostic Menu
Tap
Mag Stripe Reader.
Display
Keypad
Beeper
RS232
Tailgate
USB
Mag Stripe Reader
MSR
Swipe Card Now
Swipe a magnetic stripe card.
MSR
2 tracks read!
The terminal displays how many tracks were read.
MSR
TrackNumber=2x, Status=0x
Length=40x
The terminal displays the results of the test for the
first track read.
MSR
TrackNumber=1x, Status=4x
Length=54x
The terminal displays the results of the test for the
next track read.
Diagnostic Menu
Display
Keypad
Beeper
RS232
Tailgate
USB
Mag Stripe Reader
You are returned to the previous menu.
72 Chapter 7 Diagnostic Menu
Section 7.8 Testing the Magnetic Stripe Reader