Beeper
Length: Click
The terminal displays and sounds each possible
beep type.
Frequency: Low
7.5 Testing the RS232 Connection
This feature tests the RS232 connection.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Diagnostic Menu
Using the stylus, tap
Diagnostic Menu.
Diagnostic Menu
Display
Keypad
Beeper
RS232
Tap
RS232.
RS232
COM1
COM2
Select the communications port to test.
RS232
Host 19200, None, 8
The results of the test display.
Press [Cancel] to exit.
Test
OK
OK
Cancel
Ingenico 6780 User’s Guide 69
To Next Page
Loading...
