Ingenico i6780 - Erasing the Application File

File Menu
Read
Erase
Press [Enter] to select Read.
sysPara.cfg
Read [SOF]
010000000000 ……
010000000000 ……
The contents of the file display.
To scroll down to the next screen, press [
+].
When you are finished reading it, press [Cancel] to
return to the previous menu.
5.4.2 Erasing the Application File
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
Using the stylus, tap
Supervisor Menu.
System Config
System Info
Supervisor Menu
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Tap
Application File.
Change Password
Application File
Security
Select Appl
Select the application you want to erase.
App A
App B
App C
Select File
sysPara.cfg
Select the file you want to erase.
File Menu
Read
Erase
Tap
Erase.
Syspara.cfg
Erase [SOF]
010000000000 ….
The contents of the file display. To erase, press
[Enter].
Erase File?
No
Yes
Tap YES or NO.
Erasing File
If you selected YES, the terminal confirms it is
erasing the file.
28 Chapter 5 Supervisor Menu
Section 5.4 Application File in Terminal