Ingenico i6780 - Setting the Auto Detect Timeout

Sys Parameters
Tap
Auto Detect.
Download Method
Download Port
Setup Port
Auto Detect
Auto Detect
AD On/Off
AD Timeout
AD Retry Times
Press [Enter] to select
AD On/Off.
AD On/Off
Off
On
Select the option you want.
6.5.2 Setting the Auto Detect Timeout
You can configure the amount of time after which the unit will cease trying to automatically
detect the communications in Port 1, in units of 1/100 of a second.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Using the stylus, tap
Supervisor Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Tap
Sys Parameters.
Sys Parameters
Download Method
Tap
Auto Detect.
Download Port
Setup Port
Auto Detect
Auto Detect
AD On/Off
AD Timeout
AD Retry Times
Tap
AD Timeout.
Ingenico 6780 User’s Guide 63