Tailgate
USB
Ethernet
Dial
3201
6.4.2 Setting the Baud Rate
Set the baud rate according to the host requirements.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Using the stylus, tap
Supervisor Menu.
Serialnum Inject
System Config
System Info
Supervisor Menu
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Tap
Sys Parameters.
Change Password
Application File
Security
Sys Parameters
Sys Parameters
Download Method
Download Port
Setup Port
Tap
Setup Port.
Setup Port
Port1
Port2
Port3
Dial
Tap
Port1, Port2, or Port3.
(By default, Port 1 = Host, Port 2 = Aux, Port 3 =
E-NET port - Ethernet.)
Port X
Interface Type
Baud Rate
Data Bits
Stop Bits
Tap
Baud Rate.
Baud Rate
19200
38400
57600
Select the appropriate baud rate.
Ingenico 6780 User’s Guide 41
To Next Page
Loading...
