3.6.2 Setting Backlight to Off When Idle
When the terminal is not in use, this option allows you to set an amount of time after which the
backlight on the display screen automatically turns off. When a customer or process engages
the terminal, the backlight is turned back on.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Using the stylus, tap
System Config.
System Config
Change Date/Time
Display Contrast
Key Press Beep
Backlight
Tap
Backlight.
Backlight
Always On
Always Off
Idle Timeout
Tap
Idle Timeout.
Idle Timeout(s):
Old Value: Always On
Enter the new timeout value in seconds.
Enter New Value:
_QZ ABC DEF
GHI JKL MNO
PRS TUV WXY
CAN
CLR
E
N
T
E
R
1
23
456
78
9
0
*# , .
System Configuration
Updating
Backlight
Always On
Always Off
Idle Timeout
Tap Prev to return to the previous menu.
PREV
Ingenico 6780 User’s Guide 17
To Next Page
Loading...
