Ingenico i6780 - System Parameters Menu

Chapter 6
System Parameters Menu
6.1 Overview
This chapter explains how change system parameters. These parameters allow you to indicate
the download method, set the download port, setup the port, and configure the host port’s auto
detect feature.
To view a list of current parameter settings, see “
Viewing All Parameter Values” on page 21.
All system parameters are saved in the public file, sysPara.cfg, which can be read by all
applications that reside in the terminal.
6.2 Setting the Download Method
Use this procedure to select IBMEFT, NCREFT, Zontalk, GEMS, or Germany as your
download method.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Using the stylus, tap
Supervisor Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Tap
Sys Parameters.
Sys Parameters
Download Method
Download Port
Setup Port
Press [Enter] to select Download Method.
38 Chapter 6 System Parameters Menu
Section 6.1 Overview