Ingenico i6780 - Setting the Response Timeout

6.4.8 Setting the Response Timeout
This option sets the amount of time after which the port should cease waiting for a response,
in units of 1/100 of a second.
Display Action
Restart the terminal by pressing [1] + [Cancel] +
[Enter] simultaneously; while the terminal is
starting up, press [1] + [3] simultaneously to
access the Extended Menu.
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Using the stylus, tap
Supervisor Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Tap
Sys Parameters.
Sys Parameters
Download Method
Download Port
Setup Port
Tap
Setup Port.
Setup Port
Port1
Port2
Port3
Select
Port1, Port2, or Port3.
(By default, Port 1 = Host, Port 2 = Aux, Port 3 =
E-NET port - Ethernet.)
Port X
Interface Type
Baud Rate
Data Bits
Stop Bits
Parity
LAN Address
Retry Count
Response TMO
Tap
Response TMO (timeout).
Response TMO (10 ms)
Old Value: 300
Enter New Value:
Enter an amount of time after which the port
should cease waiting for a response, in units of
1/100 of a second.
Ingenico 6780 User’s Guide 47