Intermec EasyCoder PD4

22 ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual
Chapter 5—Editing in Form Edit Mode
Draw a Box and two Lines
Start to draw the surrounding box using the X command and then draw
the two lines using the LO command.
Command Explanation
X0,0,4,752,584↵
Draw a box
LO0,144,752,4↵
Draw a black line
LO440,232,4,160↵
Draw a black line
Place a Text Line with Fixed Data
Enter a 90° rotated text line containing the fixed data "Made in Sweden"
in text size 1. e quotation marks enclosing the fixed data will not be
printed. e text size (1) is the smallest resident font in the printer.
Command Explanation
A40,400,1,1,1,1,N,"Made in Sweden"
↵
90 degree. text line, fixed data
Place a Variable Text
e next line is a text line, using text size 5 in reverse and prints the vari-
able V00. e data printed in this field must be sent to the printer at the
time of form retrieval.
Command Explanation
A24,160,0,5,1,1,R,V00
↵
Write a text line, 1:st variable
Place a Combination of Fixed Data and a Variable
e following two command lines consist of a combination of fixed data
enclosed in quotation marks and variable data.
Command Explanation
A24,250,0,4,1,1,N,"MODEL: "V01
↵
Text line, fixed data + 2:nd variable
A472,312,0,4,1,1,N,"Checked by: "V02
↵
Text line, fixed data + 3:rd variable