EasyManua.ls Logo

Intermec EasyCoder PD4 - Page 38

Intermec EasyCoder PD4
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32 ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual
Chapter 7—Commands
Example
N
A50,0,0,1,1,1,N,"Example1"
A50,50,0,2,1,1,N,"Example 2"
A50,100,0,3,1,1,N,"Example 3"
A50,150,0,4,1,1,N,"Example 4"
A50,200,0,5,1,1,N,"EXAMPLE 5"
A50,300,0,3,2,2,R,"Example 6"
P1
Note: Font size 5 only supports uppercase characters, see example
5 in the label above.
Remarks e "DATA" field can be replaced by or combined with the com-
mands below:
Variable:
Vnn Prints the contents of variable “nn” at this position,
where nn is a 2 digit number from 00-99.
Consecutive Number Counter:
Cn Prints the contents of counter “n” at this position,
where n is a 1 digit number from 0- 9.
Cn±x Prints the contents of counter “n” at this position while
setting the counters start value to “x”. n and x are 1
digit numbers from 0-9
Enter + to increment or - to decrement.
Example:
When labels with consecutive numbers are printed next to each
other across the media, it is done by using a single counter in a
single form.
e command Cn±x in our example will be used twice and count

Table of Contents

Other manuals for Intermec EasyCoder PD4

Related product manuals