Before You Begin
x EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version)
Before You Begin
This section provides you with safety information, technical
support information, and sources for additional product
information.
Safety Summary
Your safety is extremely important. Read and follow all
warnings and cautions in this document before handling
and operating Intermec equipment. You can be seriously
injured, and equipment and data can be damaged if you do
not follow the safety warnings and cautions.
Do not repair or adjust alone
Do not repair or adjust energized equipment alone under
any circumstances. Someone capable of providing first aid
must always be present for your safety.
First aid
Always obtain first aid or medical attention immediately
after an injury. Never neglect an injury, no matter how
slight it seems.
Resuscitation
Begin resuscitation immediately if someone is injured and
stops breathing. Any delay could result in death. To work
on or near high voltage, you should be familiar with
approved industrial first aid methods.
Energized equipment
Never work on energized equipment unless authorized by a
responsible authority. Energized electrical equipment is
dangerous. Electrical shock from energized equipment can
cause death. If you must perform authorized emergency
work on energized equipment, be sure that you comply
strictly with approved safety regulations.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
