Chapter 2 — Installation
6 EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version)
Unpacking the Printer
Before you install the printer, unpack and examine it for possible
damage or missing parts.
To unpack the printer
1 Open the box and lift the printer out.
2 Check that the printer has not been visibly damaged during
transportation. Keep the packing materials in case you need to
move or reship the printer.
3 Check the label on the printer’s rear plate, which gives the
voltage, the part number, and the serial number.
4 Check that any options you ordered are included.
5 Check that all the accessories are included:
• Intermec EasyCoder PX4i printer
• Adapter for 3 in media roll core
•Power cord
• Quality check card
•Cleaning card
• Compact disk (CD) with supporting software, additional
manuals, and product information.
6 Check that the type of power cord is appropriate for the local
standard. The printer works within 90 to 265 VAC,
50 to 60 Hz.
7 If the printer has been damaged in any way during
transportation, report the damage to the carrier immediately.
8 If the delivery is incorrect or any parts are missing, report it
immediately to the distributor.