Chapter 6 — Setting Up the Printer
EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version) 63
Baud Rate
The baud rate is the transmission speed in bits per second. There
are 10 options:
•300
•600
• 1200
• 2400
• 4800
• 9600 (default)
• 19200
• 38400
• 57600
• 115200
Character Length
The character length specifies the number of bits that will define
a character. Eight bits are recommended, because that option
allows more special characters and characters specific for foreign
languages to be used. Refer to the Intermec Fingerprint v8.3x,
Programmer’s Reference Manual for more information.
• 7 Characters ASCII 000 to 127 decimal
• 8 Characters ASCII 000 to 255 decimal (default)
Parity
The parity decides how the firmware will check for transmission
errors. There are five options:
• None (default)
•Even
•Odd
•Mark
•Space
Stop Bits
The number of stop bits specifies how many bits will define the
end of a character. There are two options:
To Next Page
Loading...
