EasyManuals Logo

Intermec EasyCoder PX4i User Manual

Intermec EasyCoder PX4i
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
Chapter 7 — Setup Mode
EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version) 79
Navigating in Setup Mode
Enter the Setup Mode by pressing Setup on the printer’s front
panel. Text in the display guide you through the setup procedure.
Use the printers keyboard to navigate menus, acknowledge
displayed values, or select or enter new values.
Note: An external keyboard cannot be used inside the Setup
Mode.
Keyboard Buttons for Setup Mode
Button Function
Move one menu to the left on the same level or
scroll back in a stack of options.
Move up one level.
Move one menu to the right on the same level or
scroll forward in a stack of options.
Move down one level.
Display error messages at test label printing
failure.
Enter numeric values.
Specify negative values (leading position).
Clear displayed values.
Acknowledge and move to next menu or perform
test feeds in the Testfeed menu, or print test
labels in the Test label menu.
Exit the Setup Mode. Can be used anywhere in
Setup Mode.
-

Table of Contents

Other manuals for Intermec EasyCoder PX4i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec EasyCoder PX4i and is the answer not in the manual?

Intermec EasyCoder PX4i Specifications

General IconGeneral
Print technologyDirect thermal
Maximum resolution300 x 300 DPI
DisplayLCD
Product colorSilver
Keyboard layoutNumeric
Standard interfacesRS-232, USB 2.0
Internal memory16 MB
Media thickness2.4/10 mm
Maximum label width120 mm
Maximum label length2.7 m
Maximum roll diameter213 mm
Supported network protocolsTCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements90 - 265 VAC, 45 - 65Hz
Power consumption (standby)20 W
Power consumption (printing)125 W
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)40 - 104 °F
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth482 mm
Width238 mm
Height275 mm
Weight12850 g

Related product manuals