Intermec EasyCoder PX4i User Manual

Chapter 9 — Options
106 EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version)
Alphanumeric Keyboards
The overlay of the printer’s built-in keyboard can be replaced
with an alphanumeric overlay. However, such a keyboard requires
an application program created using the Intermec Fingerprint
programming language.
External alphanumeric keyboards can be connected to the serial
port.
Interface Boards
A number of interface boards are available for use with the
EasyCoder PX4i printer. The interface boards are either factory-
fitted or can easily be fitted by an authorized service technician.
The EasyCoder PX4i printer can accommodate one EasyLAN
interface board plus one or two other interface board.
EasyLAN boards:
• EasyLAN Ethernet interface
• EasyLAN Wireless interface
Other communication boards:
• Parallel Interface Board (IEEE 1284)
• Double Serial Interface Board
• Serial/Industrial Interface Board

Intermec EasyCoder PX4i Specifications

General

Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Display	LCD
Product color	Silver
Keyboard layout	Numeric
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	120 mm
Maximum label length	2.7 m
Maximum roll diameter	213 mm
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	275 mm
Weight	12850 g