EasyManuals Logo

Intermec EasyCoder PX4i User Manual

Intermec EasyCoder PX4i
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Chapter 2 — Installation
12 EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version)
The printer can be set to scan all communication ports. When it
detects incoming data on a port, the printer automatically
switches to use that port for both input and output. This facility
(“auto”) can be selected in Intermec Shell (see “Intermec Shell
Startup Program” on page 91) or using the Intermec Fingerprint
instruction SETSTDIO, see Intermec Fingerprint v8.3x,
Programmer’s Reference Manual. Press F5/i to get information on
the active communication channels.
Switch off both PC and printer before connecting them together.
Controls and Indicators
The EasyCoder PX4i printer has several ways of communicating
directly with its operator: three colored LEDs, a display window,
a membrane-switch keyboard with 23 programmable keys and
buttons on the front, and a beeper.
Display and controls
Indicator Lamps
The indicators are colored LEDs (Light Emitting Diodes) and are
used for the following purposes:
Power (solid green) indicates that the power is on.
Status (solid green) indicates that the printer is ready for use.

Table of Contents

Other manuals for Intermec EasyCoder PX4i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec EasyCoder PX4i and is the answer not in the manual?

Intermec EasyCoder PX4i Specifications

General IconGeneral
Print technologyDirect thermal
Maximum resolution300 x 300 DPI
DisplayLCD
Product colorSilver
Keyboard layoutNumeric
Standard interfacesRS-232, USB 2.0
Internal memory16 MB
Media thickness2.4/10 mm
Maximum label width120 mm
Maximum label length2.7 m
Maximum roll diameter213 mm
Supported network protocolsTCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements90 - 265 VAC, 45 - 65Hz
Power consumption (standby)20 W
Power consumption (printing)125 W
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)40 - 104 °F
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth482 mm
Width238 mm
Height275 mm
Weight12850 g

Related product manuals