Intermec EasyCoder PX4i User Manual

Appendix D — Intermec Supplies
170 EasyCoder PX4i Bar Code Label Printer User’s Guide (Fingerprint Version)
Duratran II Tag 57 25 0 200 200
TMX 2200 Duratran II
Labels
63 25 0 200 200
Duratran II
Syntran
66 25 0 200 200
Duratran
Kimdura
78 25 0 200 200
Duratran Valeron 79 25 0 200 200
Duratran S 71 25 0 200 200
Duratran II Tag 64 25 0 200 200
TMX 3200 Duratran II
Gloss Polyester
93 30 0 150 150
1. Exceeding the recommended pring speed may cause the printhead to wear out prematurely. If
the ambient temperature is lower than =15°C (+59°F), decrease print speed by 50 mm/sec.
2. Applies to printing of text, lines, boxes, images, and picket fence bar codes.
3. Applies to ladder bar codes.
4. Requires high printhead pressure (See “Printhead Pressure” on page 131).
Thermal Transfer Printing; 11.81 dots/mm (300 dpi) (continued)
Type/Speed Name
Ribbon
Constant
Ribbon
Factor
Label
Offset
Max Rec.
Dir 1&3
2
Print Speed
1
Dir 2&4
3

Intermec EasyCoder PX4i Specifications

General

Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Display	LCD
Product color	Silver
Keyboard layout	Numeric
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	120 mm
Maximum label length	2.7 m
Maximum roll diameter	213 mm
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	275 mm
Weight	12850 g