iv SG20B Scanner + Bluetooth Base Station User’s Guide
02 4/2013
• Revised for ANATEL certification - added
Base Station model name (SG20BS) in the
specs per their request.
• Took out firmware upgrade bar code in
firmware upgrade procedure for paired (step
5) and not paired (step 2) scanners. This was
an error.
• Corrected TBD’s in Chapter 6 (maybe - need
to check procedure to find firmware for base
station).
• Added SG20B2D and SG20B2DHP on list of
models where needed.
• Added cell phone scanning to predefined
imager modes 1d and 2D bar codes with
reflective surface.
• Updated 1D and HP reading distances with
extended reading range activated.
• Added flexible stand in accessories.
• Modified the firmware download procedure
for the scanner.
• Took out DPM mode.
Version
Number
Date Description of Change