Chapter 3 — Connect the Scanner and Base Station as a System
SG20B Cordless Scanner + Bluetooth Base Station User’s Guide 35
Connect the SG20B to the SG20 Bluetooth Base Station
The scanner beeps twice, the green status light flashes twice and
the blue Intermec Ready-to-Work indicator starts blinking. When
the scanner connects to the base station it emits a series of beeps
from low to high. The blue Intermec Ready-to-Work indicator
turns on and stays on for both the scanner and base station.
Bluetooth Association
00 0F B3 F71
To Next Page
Loading...
